2.5cm extension for Mech Battle Arena by Wolk-STL-Works (from Cults3D)

Original build: https://cults3d.com/en/3d-model/game/mech-battle-arena

I printed a bunch of these mech battle arena parts and assumed I could build some combination of the parts for a "two map battlemat" but it required an additional 25mm part they didn't provide, so I made one and I'm giving that away for free here.

The build of the Mech Battle Arena I made used the following prints, your mileage may vary if you swap out the Extension 10cm with the 12cm Hanger Extension, etc.  There may be more optimal or less optimal combinations.

• 6x 20cm Extension (Extension_20cm.stl)

• 2x Wall 90 Degree Connection (Wall_90oConnection.stl)

• 2x Hanger Wall 90 Degree (Hanger_wall_90oConnection.stl)

• 3x 12cm Hanger Extension (Hanger_Extension_12cm.stl)

• 1x 10cm Extension (Extension_10cm.stl)

• 1x 2.5cm Missing link (this model here)