Prusa Core One Magnetic Top Cover with Integrated Vent Handle, now with Embedded Magnets

Using the same 5x5mm magnets as the original, but I wanted the magnets embedded into the print just to make sure they never accidentally fall out. The magnets have a slightly looser fit than the original so they should easily slip into their voids at a print pause right after the 5.4mm z-height layer (5mm tall magnet + 0.2mm bottom layer + 0.2mm tolerance). For my print with 0.2mm layer height (see the attached bgcode), that put the pause at the 5.6mm layer (PrusaSlicer will put the pause right before printing the layer it is on).

My provided bgcode is for the MK4S printer, provided for Printables print-time & filament usage calculator. I wouldn't advise printing downloaded bgcodes, even uploaded by me.