January 28, 2026
Description
The design of the SENSU vase is inspired by the traditional Japanese fan. Just like a fan, the pleats converge towards a single point, in this case, the narrow opening. The serrated edge around it enhances this effect and adds a playful detail. The design has a graphic, modern look that brings calm to your interior.
The striking geometric appearance pairs beautifully with a subtle bouquet of pampas, oats or eucalyptus.
Dimensions: D14.1 x H15 cm
Resizable: yes, in your slicer
3D Model Type: shelled body
Printing technique: FDM / FFF / SLA
File type: STL
Recommended materials: PLA, PETG, ABS, ASA
Print difficulty: easy
Happy printing!
Recommended nozzle diameter and print settings
Nozzle diameter: 0.4mm, 0.6mm
Bottom and top layers: 4
Infill: 5%
Perimeters: 2
Perimeter speed range: 25-45 mm/s
Layer height range: 0.25 mm-0.4 mm
Extrusion width / wall thickness range: default
Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.
License info: PERSONAL USE ONLY.
3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.
Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon.
Thank you for respecting the time and effort that goes into each creation.
License:
Standard Digital File License
SLIMPRINT
