January 30, 2026
Description
Printed and Tested on 2011 Toyota Corolla. Requires disassembly of JBL Remote and mounting into switch plate. Marked Body can be imported into slicer with marks or not. Marks are separate STL to enable easy multi material panting.
Model can be printed with no supports, but if you are going to be inserting and removing the panel a lot, you may want to print on its side, so the tabs are not going to break easily at the layer lines. Printed vertically with no supports PLA was very week, PETG the tabs seem strong.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
chrisrossx
