Slim 250ml Can Dispenser

Optimize your fridge space with this gravity-fed dispenser specifically designed for slim 250ml cans (like Red Bull or slim sodas). This organizer holds up to 12 cans and features a dual-layer rolling system. Cans are loaded at the top, roll to the back, drop down, and roll to the front for easy grabbing.

The best part? It features a solid top platform (roof), allowing you to stack other fridge items on top, so you don't lose any storage space!

Technical Details:

Dimensions: 156mm (Width) x 142mm (Height) x 340mm (Depth). Perfect for compact fridge organization.

Parts: This is a 9-piece modular design, allowing it to be printed on smaller print beds.

Assembly: The parts are designed to be glued together (I recommend CA/superglue). Ensure the rolling tracks are sanded smooth at the joints for the best performance.

Material: Recommended in PETG for fridge use, but PLA works as well.

Print Settings & Tips

Brim/Mouse Ears: The side panels have thin structural beams. To prevent them from warping or detaching from the heatbed, I highly recommend using mouse ears or a brim on those specific parts.

Support: Minimal supports may be needed depending on your printer's bridging capabilities, but the parts are designed to be as print-friendly as possible.

Infill: 15-20% is plenty for the main structure.

If you like this design, please leave a Like, review and post a Make! Your feedback helps me  improve my future designs.