January 30, 2026
Description
Print Specifications
Specification | Value |
Estimated Print Time | 57 Minutes |
Filament Used | 12.4 g |
Filament Length | 4.16 m |
Print Settings
Setting | Value |
Layer Height | 0.24 mm |
Wall Thickness | 6 perimeters |
Infill Density | 25% (gyroid) |
Top Layers | 0 |
Bottom Layers | 0 |
Fuzzy Skin | external |
Z Seam Position | Aligned |
Settings Used
This Print: 0.40mm nozzle / 220C Nozzle / 55C Bed
Print Notes
Optimized for Creality Ender-3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from OrcaSlicer
Tip: Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MindCubby
