fight club hueforge

fight club hueforge

3D Print Instructions

---------------------

Layer height: 0.120 mm

First layer height: 1.000 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #141112

Color swap plan:

1. Start with #141112

2. Swap to #ba4d39 at layer 1 (~1.000 mm)

3. Swap to #9e1808 at layer 3 (~1.120 mm)

4. Swap to #544e46 at layer 4 (~1.240 mm)

5. Swap to #fbefd0 at layer 5 (~1.360 mm)

6. Swap to #bbb0a5 at layer 6 (~1.480 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad