ObiWanStenobit Case & Holder

This case is designed with protection and portability in mind, while maintaining a clean and functional mechanical assembly.

Full project repository: https://github.com/ivndbt/obiwanstenobit

Project background and design history: https://ivndbt.com/makes/ows/ows.html

Included parts

• Left split keyboard case

• Right split keyboard case

• Controller PCB case (top + bottom)

• Protective holder for transport and storage

Required hardware

• 2x M2x10mm Phillips pan head screws

• 8x M2x4mm Phillips pan head screws

• 10x M2 nuts

• 50cm paracord 550

• 1x sping buckle

Printing notes

When printing the left and right split cases, it is mandatory to insert a pause in the slicer at the layer immediately before the nuts are covered.
This allows the M2 nuts to be placed into their dedicated slots before resuming the final layers of the print, ensuring proper mechanical fixation without post-processing.

License notice

This project is licensed under CERN Open Hardware Licence v2 (CERN-OHL-S).

The license selection on Printables is for platform compatibility only.
The legally binding license is the CERN-OHL v2 as published in the GitHub repository and included in the files.