March 31, 2022
Description
Simple shelf bracket. 75mm x 30mm
Intended for 10-12cm deep shelves.
Printer:
Railcore 300 ZLT
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15% 3D Honeycomb
Filament:
Overture PETGMarble
Notes:
Made this to support small shelves holding misc. plastic organizers full of screws, nuts, washers, wire crimp ends etc. Actual shelves will be made from reclaimed pallet wood.
Increase infill % if you need more strength.Will work nicely with either M2.9 oval head screws or M3 self-tapping countersunk screws so they fit flush with face.
Use appropriate drywall anchors if you're going that route.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
wouldstain
