Whiteboard Eraser Holder (For Home Depot Whiteboard/Chalkboard)

Background

• Started this project by looking for a cheap whiteboard solution

• Found White/Chalk Board for cheap at Home Depot (product name below)

  • 3/16 in. 2 ft. x 4 ft. Black Chalk / White Marker MDF Board

• The back of the board is a chalk board, so the print can work as a chalk holder too

3D Print Info

• 3D print slides tightly onto the bottom of the board

• The stl has the object on its side, but you will want to print it with the bottom on the print bed.

  • This can be changed in any gcode slicer.

• There needs to be a 2mm gap between the whiteboard and the wall for the print to slide on. I used the Velcro-type command strips to hang the board and the gap was enough.