launch on mars hueforge

launch on mars hueforge

3D Print Instructions

---------------------

Layer height: 0.120 mm

First layer height: 0.200 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #b29e70

Color swap plan:

1. Start with #b29e70

2. Swap to #f4c377 at layer 1 (~0.200 mm)

3. Swap to #f38e42 at layer 2 (~0.320 mm)

4. Swap to #db4a11 at layer 3 (~0.440 mm)

5. Swap to #7a2b10 at layer 5 (~0.560 mm)

6. Swap to #333f3a at layer 6 (~0.680 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad