E27 Minimalist Japanese Desk Lamp

Learnt from my previous builds. No more gimmicks this time, just a simple desk lamp. Feel free to remix on my Tinkercad.

PARTS LIST

These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That will help offset the costs of my future projects. 👍

• 1 X (A) Top

• 1 X (B) Bottom

• 4 X (C) Post

• 4 X (D) Plate

• Recommended - 1 X (E3) Bulb holder cover

• Recommended - 1 X (E4) Top cover

• 10 X M3*10 Screws

• 1 X E27 Base - This one | search

• 1 X E27 Bulb - Zigbee Smart Bulb | search

• 1 X Power Plug

• Optional - USB Charging Station

• Optional - Moes Multi-Mode USB Gateway

• Optional - Angled USB Adapter

HOW TO ASSEMBLE

If you want to put a USB charger in the lamp:

• Print (E1) instead of (B).

• Swap 1 X (D) with (E2).

• The max dimension of the USB charger is 107 X 78 X 40 mm. Feel free to modify the bottom piece to fit yours.

PRINT SETTINGS

• 0.2mm layer height will do.

• Snug supports - Just a little for the grooves and screw holes.

• Iron the (D) plates if you want.