FitcamX Rear Camera Mount with added features

Thank you @jrichards222 for the original model.

I added a recess for the camera so it would prevent rotating from cable strain, as well as added a cable route through the clip hole.

I recommend adding hook sided tape to the bottom side of the mount to help hold it in place.
Hook side tape example: https://a.co/d/1vewp1Z

Installation:

1. Remove push pin.

2. Affix mount to roof liner lining up the holes. Cable channel should point to the front of the vehicle.

3. Push cable through the hole leaving about 5 inches of slack for the camera.

4. Insert plastic push pin into hole.

5. Stick camera to mount.