Bar Rig

Here's a simple bar rig but with a difference. I didn't want to rely on attaching the hook line directly to the long end so instead I put a hole through the center. The hook end line is threaded through the center hole and attached to the main line with a swivel (see picture). There is probably a better way to connect the hook line to the main line but this works and allows easy adjustment of the bar rig height relative to the weight.

I've uploaded two lengths: 7.5 & 9.5 inches

I printed this with Overture PETG black with 0.3mm layer height and 25% infill. No supports or brim required.

Category: Sport & Outdoors