March 31, 2022
Description
This is a replacement bar-end clamp for a ball-socket style motorcycle mirror. Need 2 M4 screws and threaded inserts.
Printer:
FLSUN i3 2017
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
15
Filament:
Amazon Basics PETGBlack
Notes:
No supports needed, just print them on their sides. PLA might be too brittle. PETG works well. ABS, or Nylon should be good too.
Printed with 5+ Perimeters for an "overkill" factor. Holds up to a surprising amount of force, and holds the mirror firmly.
Post-Processing Notes
I used M4 threaded inserts for the screws.
Additional:
I enjoy the style of these handlebar mounts, but cheap alloys break easily. Especially when someone knocks over your motorcycle. Instead of buying a new pair.... again.... I tried my hand at replicating them in Fusion360. So far they seem to work quite well.
License:
Creative Commons — Attribution
9
TheKwijibo
