Small Glue / Epoxy Mixing Tray - With "Finger Protection"

• The ergonomic thumb recess provides much better control, helps keep your fingers away from the nasty, sticky stuff in the tray.

• Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray
  in horizonal mode, or the LH tray in vertical mode (see pictures). 

• Different styles of mix/application wands.

• This remix is approximately the same overall print size as the version by @sketchmeto_4171426.

• Uses less than 3 meters of 1.75mm filament per unit.

The included .3mf file uses the Prusa 0.20mm "structural" print setting.  However, many will be able to run the "speed" and/or 0.25mm settings without any issues when printing PLA.

If you prefer a taller side wall (z-axis) or larger tray (x/y axis), simply resize the object in your slicer to the larger dimensions.

As of June 2026, more than 50% of all that who view this model have downloaded it.