March 31, 2022
Description
This is a resin vat drain stand for the Creality Halot One. It features a height-adjustable funnel holder, and the vat holder is height-adjustable as well. The locking knob holes are designed for heat-set threaded inserts, and the knobs are designed to fit an M5 cap screw.
I designed this for 3/4" Schedule 40 PVC pipe, but I have also included a 3D-printable pipe design that will fit together in case you do not have access to US-style PVC pipe. I recommend printing 4 of these segments, and slipping them together with a dab of CA glue to secure them to each other.
To clean the lettering off of the white PCV pipe, wipe it down with acetone or nail polish remover.
**NOTE** Depending on your printer's tolerances, you may need to lightly sand the inside of the pipe-mount hole on the Funnel Holder, Stand Base, and Vat Holder. I did not have to sand on my test print, but you may have to.
This design may fit other resin vats of similar size, but I would verify this first.
The entire assembly will fit on a standard Prusa i3 MK2s Bed if you want to print it all at once.
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Design Files Included: .stl, .f3d, .skp, and ,step files for Fusion360, Sketchup, and other 3D design programs.
Follow The Makers Workbench on:
I have only tested this model using the 0.35mm FAST preset in Prusa Slic3r 2.2.0 with the following amendments made. All measurements assume you are printing the full parts list with 2-knobs, 4-pole pieces, and 2-knob caps.
Print time for the full plate on a stock Prusa i3 MK2s is about 24-hours and uses an estimated 266-grams of PLA filament. This can be greatly sped up using more refined settings in your slicing program, or with a larger nozzle.
Print time for just the Stand Base, Funnel Holder, Vat Holder, 2x Knobs, 2x Knob Caps, and 1x Pipe cap is 7-hours 48-minutes. Using the same settings above.
PLA Used: Polymaker Polylite PLA https://amzn.to/36zhs7P
Creality Halot One Resin Printer https://amzn.to/35sajsz
License:
Creative Commons — Attribution — Noncommercial
7
TheMakersWorkbench
