March 31, 2022
Description
Set of drawers for small parts.
Includes files for drawers divided into 1, 2, or 3 compartments.
Drawers measure 50mm wide X 120mm long X 25mm tall.
Overall size is approximately 177mm X 121mm X 103mm.
Minimum print dimensions required: 177mm X 121mm.
Quantities:
Back x1
Drawers (any) x9
Face x1
RailDouble x16
RailSingle x4
Top x1
The drawers and rails are 1.2mm thick. I manually set my perimeter extrusion width to 0.6mm so that two paths and no infill will get the correct thicknesses.
The RailSingles go in the four corners. All others are the RailDoubles.
I printed with black ABS, but I see no reason PLA wouldn't work as well. I used Crazy Glue / Super Glue / Cyanoacrylate to glue everything together. With ABS you could also use ABS juice / acetone.
Category: Tool Holders & BoxesLicense:
Creative Commons — Attribution — Share Alike
10
PvtDBJackson
