February 4, 2026
Description
A way of making on non-multimaterial printer:
Print separated parts with corresponding color material.
Insert the Insertion1 and Insertion2 pieces into Base1 and Base2 respectively. You can apply the CA glue if you are not satisfied with the "dry" connection.
Glue Base1 to Base2 ensuring the alignment of the pedestal on Base2 with the central part of Base1. I used hot glue.
Glue the assemble to crocodile hair clip or anything you desire.
Note that there is zero tolerance/spacing between Insertions dimensions and frame sizes in the Bases. Assuming your printer and filament profiles are properly calibrated.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Iruya Zeminoshi
