February 5, 2026
Description
This is a 3D printable holder/stand designed to convert a 1x18650 power bank into a convenient handheld flashlight or lamp.
The model is optimized for printing with PETG or PLA filament.
Print it in the orientation shown in the photo, with a layer height of 0.2 mm.
For PETG, you might need to slightly increase the scale to ensure a snug fit.
The case includes holes for M3 screws to securely fasten the power bank in place.
If you plan to use this holder as a lamp stand, you will need an M6 screw to attach the lamp fixture.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
SemkoAnton
