March 31, 2022
Description
This is a replica of figure B from the box "Wizard's Room", number 2009 from Grenadier
(see http://www.dndlead.com/grenadier/ADandD/2009.jpg )
Reproduced using https://www.thingiverse.com/thing:1762299
"Shelf unit with tomes, scrolls, and artifacts"
The scan of the underside of the shelves is less accurate, because the camera couldn't see there. More images from more vertical angles might help, but the free version of the software is limited to 50 images.
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
25%
Filament: GizmoDorks PLA orange
Notes:
Print at 100% to match size of original
set Z = -0.6mm
I used supports, but they are a pain to remove.
If your printer bridges well, try printing without. Let me know how it goes.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
engineer27
