The no-strings part cooling fan duct for Sovol SV01 Rev.3

Introducing the no-frills, no-strings duct your SV01 will become an instant fan of :D. Designed with PETG in mind. A sagging-resistant design, it will not bump into your prints. Minimal path air flow that will not cool the nozzle.

• Rev.2.1 is simplified internally to print faster and more reliably and has a built-in support for the vent arch. Just Xacto it away from the part when done printing. (10-29-21)
• Rev.3 Standalone has an optimized airflow path and is perfect if you no longer use the stock metal heat break shroud as it will mount directly to the X-carriage using one short M3 screw. (5-13-22)
• Rev.3a Standalone for BMG/Left style extruders added. (10-22-22)

All further development for BMG/Left extruders goes here.

It's so simple to print even I could do it, please post makes! :)

Print Settings

Printer:

Sovol SV01

Rafts: 

No

Supports:

Included

Resolution: 

0.2

Infill:

15%

Filament:

SainSmart PETG

black

Notes:

Needs PETG or ABS due to proximity to the hot end. Tinkercad deisgn is available in CC attrib non-commercial share-alike license.

Category: 3D Printer Parts