Xiaomi Mijia holder - Multiboard

This is a holder for a wireless Xiaomi Mijia thermometer / hygrometer to mount it on your Multiboard wall.

Extra parts

You need a Snap to attach this to your Multiboard. I'd suggest to use a standard (flush) one:

• Multiboard Snap

Print settings

Print with usual Multiboard Settings which are a 0.4 mm nozzle, 3 perimeters wall thickness, 0.2 mm layer height, 15% infill and no supports.

Apart from that, use your printer's default settings.

Caveats

The Push-Fit connector is not my preferred solution, because they are often quite loose. 

But because of the small size of the holder, I can not use point slots or rails. There is not enough space for two of them, so the holder could rotate along a single point. And a Peg Click would require extra support, which I try to avoid.