February 8, 2026
Description
Simple suction cup mount for mirror hang tags. Requires 1.2 inch diameter suction cup (link below)
Design for hang tags with a hole diameter between 22.3 mm and 25 mm.
Installation: spin the tag onto the mount similar to putting keys on a keyring.
Printed in PETG with no supports.
Designed for vehicles with bulky mirror housings where these small hang tags are difficult to hang and see.
Suction cup: https://www.amazon.com/Pawfly-Suction-Plastic-Decoration-Organization/dp/B0B38CHSZH/ref=ast_sto_dp_puis?th=1
Mount Dimensions:
Suction cup dimensions:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
JTheAce
