Anime Bleach wakizaschi for cosplay

I created this model because I needed a wakizashi for cosplay. I tried to make it out of wood, but the result was tedious and unsightly. So I decided to model a 3D model for printing.

I recommend cutting through the center for printing and adding two or more pins for precise alignment. I personally printed it this way and the result was excellent, and no supports were needed. To prevent it from falling apart, I glued the model together with cyanoacrylate adhesive.

The model is ready for insertion of magnets and threaded rods, but if you glue the individual models together, magnets and threaded rods are not necessary.

Printing parameters:

I used PET-G material, 5 perimeters, 5 top/bottom infill, 25% infill.