April 4, 2026
Description
4 different plant support rod versions, suitable for different print beds
>>> (diagonal pre-orientation to obtain the maximum length):
180 x 180 mm ---> 25 cm length
220 x 220 mm ---> 31 cm length
256 x 256 mm ---> 36 cm length
300 x 300 mm ---> 42 cm length
(diameter of the rod: 7mm)
Optional connector for extending the rod.
Optional v-shaped support tip sleeve for directly supporting individual plant shoots of houseplants without tying them up.
-----------------------------------------------------------------------------------------------------------------
10.2.2026 Update:
Added a short version with 25cm length for 180 x 180mm print beds.
------------------------------------------------------------------------------------------------------------------
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
6 walls
60% gyroid infill
7 top and bottom shell layers
no supports needed
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Corvus
