Soocas W3 Pro Nozzle Case and Stand

Soocas W3 Pro Nozzle Case | Organizer | Countertop Stand

Keep your Soocas W3 Pro nozzles protected and organized at home or on the go. This case clicks securely shut for travel and uses clever filament pins to lock the nozzles in place.

Key Features:

• Secure Closure: Lids snap closed with a satisfying click.

• Travel-Ready: Protects nozzles in a bag or suitcase.

• Freestanding: Also works as a tidy countertop stand.

• Holds all 4 Nozzles

Some Assembly Required:

1. Print the base and lid

2. Cut two 60+mm lengths of standard 1.75mm filament

   1. I've used PETG for this

   2. It's easier to cut a longer piece and then trim it after inserting

3. Insert the filament pieces into the two small holes on the side of the base and cut them flush

4. These internal pins will hold your nozzles securely in their slots.

Print Settings:

• No Supports Required

• Print Orientation: Print the base and lid separately, each flat on the bed. Lid is printed upside-down.

• Material: PLA or PETG.

• Infill: 15%.

Use It Anywhere:

Click it shut for travel, or leave it open as a countertop organizer. The design keeps your nozzles secure and hygienic wherever you go.