CoreONE+ Narrow Spoolholder

I've got a couple of old, non-standard spools that didn't fit on the CoreONE filament hanger. This model is a modification of the CoreONE+ spoolholder to extend it and shrink it down to hold a spool that's 90mm wide with a center hole 30mm in diameter.

I maintained the CoreONE+ design features where possible given the size constraints.

Recommended print settings (inherited from the CoreONE+ upgrade files):

• Layer height: 0.2 mm

• Infill: 20%

• Infill pattern: Grid

• Brim: Optional

No supports should be necessary.

Also attached is the quick-and-dirty OpenSCAD script I used to generate the model. Just update the path to the CoreONE+ Upgrade community edition spoolholder and set your parameters as desired if you want to create a different size.