Wear protection panels for entryway bench

Simple 90 degree protection panel, to protect hardwood top from wear when tying shoes

Required hardware: 

Whichever filament you prefer, something that's not too brittle might be good so it doesn't break due to use. 

VHB tape. Put a strip on the back of the part facing the build plate, and attach tape to the front of the slab. 

Current versions: 

Currently there are two versions: 

• 150x25, 150 mm wide made for tops that are 1" or 25 mm thick 

• 150x20, 150 mm wide made for tops that are 20 mm thick

Let me know if you need a different measurement. 

Printing instructions: 

Print as placed with no support. 

Note: 

Posted model comes with magnet holes. If you require a different base, drop a comment, or use the rebasing tool of your choice.