Prusa Mini bracket ~ Revo Connect

MODEL DETAILS

For use with ‘Revo Connect’ nozzle holders.

A bracket for your Prusa Mini. Slots onto the top of your Z-axis. Designed to be a tight fit.
 

RECOMMENDED PRINT SETTINGS

These are the recommended print settings. Tolerances may still work with larger Nozzles/Layer heights but you will lose some of the finer details.

• 0.4 Nozzle or smaller
• 0.2 Layer height or smaller
• No support material is required.
   

DESIGNER

Designed by Will Hardy.

Check out E3D!