Lenovo SFF PC DVD Drive Blank Space Filler

I have a small form factor Lenovo desktop which was turned in to a server. That's a story for another day but what's important is that I was left with an ugly hole in the front of the case. I quickly modeled this blank to fill the gap.

You can glue it or use 2 screws (in the 2 holes at the front) to hold it in place. It's designed with slight tolerances as not all 3D printers are equal.

• 0.24mm layer height

• 15% infill

• 3 outer walls, 3 bottom layers

• PLA, PETG or ABS are all fine.

If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.