Computer Case USB and Audio Hole Cover

I have a small form factor Lenovo desktop which was turned in to a server. That's a story for another day but what's important is that I also removed the USB and audio ports as they weren't needed; they left some holes in the front of the case. This simple piece covers them.

I recommend using some superglue (or B7000 / T7000 if you think you'll need to remove it in the future) to hold it in place. Put a few drops on the edges of and in-between the ports and stick it down. 

• 0.2mm layer height

• 20% infill (doesn't matter due to its thinness.

• 3 outer walls, 3 bottom layers

• PLA, PETG or ABS are all fine.

If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.