Parametric Wet/Dry Vacuum Accessories Holder

Years ago I built a PVC pipe supported stand to hold a cyclonic separator above my wet/dry vacuum in the shop.  The locations for the pipe took up built-in locations to hold the tubes and other accessories.  This led to endless searching for items. Enter the solution: holders that mount to the 1.5" PVC uprights.

This set includes two pieces that hold the tubes and accessories with a very satisfying snap and a compliant release.  The tubes need a lower and an upper print.  It could use two uppers, but wouldn't give the tubes a surface to sit on.  The brackets have countersunk holes to be screwed to the PVC after drilling a pilot hole.  The screws I used were approximately 1 cm long wood screws.

The Fusion 360 file is parametric if your PVC or accessories are different from mine.