Vorschtein 978 - 1:10 scale supercar

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY!

The Vorschtein 978 is a large 1:10 scale display model.
This model was inspired by a Porsche 918, and portrays what it's successor could look like.

SIZE / WEIGHT:

• Total assembly: Roughly 45 x 20 cm

• Filament: Roughly 1 kg of filament using 10% infill.

MAKEABLE FOR EVERYONE:

• Largest part: 140 x 170 x 90 mm 

• Minimal build volume:  180*180*180 mm³ (Some parts might need rotating to fit)

• All parts are pre-oriented 

• Includes painted on supports

• Includes a detailed assembly guide

• Includes tips & tricks

• No AMS/MMU needed! (Optionally parts can be enhanced with AMS/MMU)

FEATURES:

• Rolling wheels

• Steerable wheels

• Fully detailed engine

• Openable doors and panels

• Removeable roof-panels

• Can be disassembled

• Easily swappable parts

• Also includes a VARIOSHORE-TPU DISCOUNT

ADDITIONAL PARTS:

• M3x8 (20x)

• M3x10 (43x)

• M3x18 (2x)

• M3x30 (6x)

• M3x35 (2x)

• M4x20 (4x)

• M4 hex nut (8x)

• 624-ZZ bearing (4x) (optional)

• 2.5 mm Allen wrench

• 3.0 mm Allen wrench 

• CA-glue

• The guide has links to recommend screw/hardware-kits!

RECOMMENDED SETTINGS:

• Resolution: 0.2 mm layerheight

• Infill: 5-10%

• Supports: Yes, it is recommended to use organic, and paint-on supports!

• Brim: Advised against warping, not mandatory!

NOTES:

• Assembly: The model contains an assembly guide, please follow this guide with care. 

• Fitment: Fit check any parts before permanently attaching them! Some parts may need sanding or filing!

SUPPORT:

Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected]

Feel free to share your makes with us on here, or over on Instagram and tag us using @stllabs

(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)