December 30, 2019
Description
I took the FPV-Rover V2.0 and made some adjustmants to fit my hardware and my liking.
Things I have changed:
-inner_frame_left and inner_frame_right:
I deleted the venting openings. These pieces are now much sturdier.
-motor mount:
Changed to fit the hole pattern of my Maxon Motors (EC-i40 motor 473023).
-small_gear:
Changed to fit the 6mm shaft diameter of my Maxon Motors (EC-i40 motor 473023).
-FPV camera setup:
It's now more integrated in to the main bodys design. It's still able to tilt but I got rid of the LED-light.
-body_top_lid + gps_mounting_bracket:
I made a small pocket for my M8Q GPS receiver and a bracket to easily mount it with two M3x8mm screws.
Massiv thanks to markus_p for the step-files of the FPV_Rover V2.0.
I'm going to update this project as I continue with it.
As you can see I'm now done with modelling and printing my rover. Now I'm trying to setup my omnibus v6 nano flight controller with ardupilot.
I'm trying to make a little write up on how to build this here: https://www.instructables.com/id/FPV-Rover-V20-Remix/
If there are any questions feel free to ask.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
swiss_beluga
