Raspberry Pi Camera Popcorn Joint Stand

I needed a simple, freestanding mount for a RasPi camera with decent adjustability and wasn't really happy with the options I found, so I mashed this up. Not much to it, just print one base, one cup, one frame, and as many popcorn joints as you need. You'll need a M4 nut and bolt to attach the cup to the frame. The frame was modified from the original to accept (I think) every variety of RasPi cam and the various generic knockoffs (except that big night vision one, obviously).

If you want a super-sturdy base, I also created this 1/2" NPT adapter so you can use a cast iron floor flange: https://www.printables.com/model/160254-popcorn-joint-to-12-npt-adapter

Print Settings

Printer:

Kingroon KP3S

Rafts: 

No

Supports:

No

Resolution: 

0.24

Infill:

20%

Filament:

NovaMaker ABS

Orange

Category: Electronics