December 31, 2019
Description
Stackable nozzle holder that serves as a tag when nozzle is installed on the printer. Each holder stores 3 nozzles. I use a holder for each size nozzle.
Print the holder with the front facing down and you won't need supports or brims.
Supports: NO
Brim: NO
Layer Height: 0.15 or 0.20
Nozzle: 0.4mm
Filament: PLA
Printed mine with PLA, motor heat hasn't caused any issues as of yet. I used a label maker to identify the nozzles sizes. I'm including the STL so you can modify to engrave a nozzle description on the name plate area.
Post Printing
For best results, I would recommend that you tap the nozzle holes. Do not install HOT nozzles; wait until they cool off.
License:
Creative Commons — Attribution
7
Cowwolfe
