February 23, 2026
Description
PTFE cutter for cutting 4mm PTFE tubing.
The two base pieces with alignment pins are easy to glue together.
Then insert four segments of a 9mm cutter blade and secure them with the screw (M5).
You will need four segments of a 9mm cutter blade 60°.
Best results with a single-edged blade.
Printed with Annycubics PLA+ Flash Green and Bright Red.
LW 0.4 LH 0.1
4 Perimeters only 1 at Top Layer
4 Top/Bottom Layers
Top Pattern Concentric
20% Honeycomb Infill
Speed 150mm/s
Print time approx. 68 min.
It also cuts filament very well.
But remember... Cut three times and still too short ;-)
License:
Creative Commons — Attribution — Noncommercial
9
TeeCee
