MMX - with printable holes and other quick fixes (SeleadLabs kit 2026 remix)

Just a quick remix - added printable holes to a few parts - print as oriented in attached files. Use all other print settings from original models.

Fixed some parts alignment

EDIT: 27.02.2026 - gatespacer bearing embedding made better printable
EDIT: 08.05.2026 - added shaft with 19 teeth, less supports and zero position (67° angles between actuators), for 19T shaft, you shloud also use (for proper belt tension):

• M3x16 screw with 4mm/3mm PTFE tube screwed into spare (non-used) heat insert - orange mark on photo

• "mmx-right-side-cover-spacer-for-19T-shaft" for screw holding side panel (to not interfere with belt)  - red mark on photo. Screw holding side cover spacer is for photo only, it should go through side cover also!

With 19T shaft, the servo angles are:
0 - release angle
45 - lane 0
90 - lane 1
135 - lane 2
180 - lane 3