Pre-Supported Yolk for Satyr 4 Headset

Satyr 4 yolks with custom support objects for hassle free printing (probably)

Bambu studio ignores support blockers in holes half the time. I made custom support objects to get a cleaner print in the correct orientation.

Test with one yolk first, you will need pliers to get a grip on the support-block in the pivot-block end, but it should come out cleanly. If it doesn't, sink that part of the sub-assembly into the build plate by around 0.1mm, or try printing with a thinner layer height.

Change the material to whatever you choose to use, PETG or ASA/ABS ideally.