Mechanic LS720+ Dimmer Enclosure

You need:

1. The guts from an LS720+ USB-C dimmer module

2. x4 - M3x8mm Countersunk Screws

3. Adhesive Tape if you want to mount it

This is a replacement enclosure for the Mechanic LS720+ polarized light filter and LED light combo for digital microscopes. The stock housing was to tight and the adjustment knob on mine would rub against it and make it difficult to adjust. QOL improvement at best I suppose. I left the area where the shaft protrudes flat in case you want to use a different knob than the original. The enclosure fits the stock cord grips so no need to mess with anything, just switch all the internals over. 

It's the perfect width to mount to 3030 extrusion FYI.