Wide 10" Rack 5.25" Drive Adapters

Recut original with Orca.

1. The ears are 4mm wider, giving an extra 8mm for installation in wider racks (for example, where the RB5009 fits with standard metal ears).

2. The side screw slots were lowered 2mm to down, so my 2.5" SATA case doesn't protrude from the top, leaving small gaps for ventilation (possibly due to the dimensions of the Procase G2-104-SATA3-BK enclosure).

Printed in PETG, the layout is "as is" after addition; no support is required. However, calibrating the printer's dimensions is advisable.

P.S. I already tried an alternative remix of this model, but it didn't reach the mounting holes, and the enclosure protruded from the top, leaving a large gap at the bottom.