Fiio Snowsky disc carrying case

Snowsky Disc Carrying Case

Simple magnet-locked carrying case designed for the FiiO Snowsky Disc portable player.

I wanted a compact, minimal case that:

• protects the player during transport

• prevents scratches in a backpack

• closes securely without bulky latches

Features

• Two-part design (base + lid)

• Integrated magnet lock

• Snug fit for FiiO Snowsky Disc

• Magnet holes designed for tight press-fit (no glue required)

• Easy to print (no supports required)

Parts List

• 4 or 6 × 3×8 mm neodymium magnets
  (You can insert either 2 or 4 magnets in the base for stronger locking.)

• 1 × M3×35 screw

• 1 × M3 heat insert
  (A regular nut can be used, but it will require a longer screw.)

Printing Notes

Magnet holes are designed as a very snug press fit, so glue is not required.

This requires a well-tuned and dimensionally accurate 3D printer.
If your printer tends to over-extrude, you may need to slightly modify 3d model before printing.

Tested on: Bambu Lab X1C

Assembly

1. Print both parts.

2. Press-fit magnets (check polarity before installation).

3. Install heat insert (if used).

4. Assemble with the M3 screw.