pistol crossbow bolt

6.4" bolts "shoes" for pistol crossbow compatible with miniadder.

print with any though and impact resistant filament and probably make you extrusion width smaller than 0.4mm.

bring your own 5mm steel rod of roughly 11cm including point, then you will have made yourself a cheap heavy bolt for your pistol crossbow.

I will probably make some more versions with 3, 4mm rods because the 5mm ones really do not allow for much material around the rod and thus might break faster, people are interested.

also, i recommend printing it flat.

enjoy but be careful always, i am not responsible in any way whatsoever for what happens with or by you.