Makita RP0900 Router "Lever"

I broke my lever on my router, so 40mins later i was on track again.

It fit tight, i screwed the m8 bolt out of the router and hammered it down.

Print and slice

Before you print just perform a cut in prusaslicer or whatever you use and try out how it fit your m8, and remember it has to be tight so it dont fall of.

My print settings:

• Petg
• Resolution: 0.3mm
• Support: Yes. ( inside where the m8 goes in you dont need anything so block support)
• Infill: 40%( you could probely go down)

Goodluck, and happy printing… hasta la vista