April 3, 2022
Description
This is a replica of figure E from the box "Halflings", number 2002 from Grenadier
(see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2002.jpg )
Reproduced using https://www.thingiverse.com/thing:1762299
Not too happy with how this one turned out -- might have to revisit it later.
But for now, this concludes the boxed set 2002 Halflings, so they are all posing for a group shot.
UPDATED: Better reconstruction. Front leg isn't crooked. See Print settings.
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
25%
Filament: 3dBestQ PLA coffee
Notes:
I printed at 73%, but the model was slightly larger than the original.
Try 70-72%.
Set Z = -0.4mm
Model #2: Print at 100%, set Z = -0.5mm.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
engineer27
