Leafy accessories/necklaces/keys wall hanger

Most wall hangers have the same personality as a spreadsheet:

square, functional, and emotionally unavailable.

So I made this one.

This is an artistic accessories/necklaces/keys wall hanger shaped like a leafy branch, with multiple little hooks tucked underneath like tiny claws of organization. It’s practical, sturdy, and actually looks like something you’d hang on purpose, not something you apologize for when guests come over.

Bonus: it’s made for two-color printing, because the leaf details look chef’s kiss when you give them their own color. (Pick whatever matches your style. Goth branch? Neon jungle? Beige minimalism? Your wall, your rules.)

What it does

• Holds necklaces, bracelets, earrings, keys, and other “where did I put that?” items

• Multiple hooks so your chains don’t become one giant emotional knot

• Artistic wall decor that happens to also be useful

• Flexible mounting: screw it in, or go full renter-mode and glue/tape it

Print settings (the “don’t panic, it’s easy” section 🤓)

• Total filament used: ~50g

• Nozzle: 0.4mm

• Recommended layer height: 0.20mm

• Top/Bottom: 4 layers

• Walls: 3 wall loops

• Infill: 15% Gyroid

Two-color tip: If you have a multi-color system, you’re living the dream. If not, you can still do it with a simple filament swap at the right layer (your slicer will happily help you pretend this is normal).

Installation options

Option A: Screws

• You can use up to M4 screws to mount it to the wall.

1. Hold it where you want it.

2. Mark the holes.

3. Drill/plug as needed (depending on your wall type).

4. Screw it in.

5. Hang your stuff and feel like a responsible adult for 6 minutes.

Option B: Glue / Double-sided tape (renter-friendly)

If you prefer glue/tape, you can disable the screw holes in your slicer (remove them with simple delete).

Then stick it to the wall with strong double-sided tape or mounting adhesive.

Feedback

If you print this, I want to see it. 😄

What colors did you choose? Did you go subtle, or did you summon a rainforest?

Also tell me what you’re hanging on it: keys, jewelry, or the weight of your unfinished projects.

Disclaimer

This model is provided as-is. Your results may vary depending on filament type, printer tuning, wall material, and the general laws of gravity in your home. If you’re hanging heavier items (like chunky key bundles), screws are the safer choice.

Side note (mandatory)

Oh yes, I just love spending my free time designing wall decor for strangers on the internet. It’s not like I have a life or anything. Nope. Just me, my computer, and an unhealthy attachment to polygons.

If you enjoyed this model, hit like. It’s the digital equivalent of a polite nod.

And if you’re feeling extra generous, you can buy me a coffee via my Ko-fi.  because apparently motivation runs on caffeine. 😌☕