Magnetic Can Holder (400ml) Workshop

Installation & Required material
This model requires specific hardware for mounting:

4x Magnets: There are slots designed for block magnets sized 50x10x2 mm. You will need to glue these into the back recesses.

3x Screws: The model features holes designed for 3.5mm countersunk screws if you prefer a permanent wall mount.

Print Settings:
Layer Height: 0.12mm

Infill: 15%

Walls: 2

Supports: Organic Tree. (Recommended for the overhangs inside the magnet slots).

Creation Process:
The model was created in a CAD environment

Photo & Setup Details:
Camera: Xiaomi Redmi 14.

Lighting: Custom RGB Lighting setup used to highlight the surface texture and geometry.