Ubiquiti Flex Mini 2.5G Switch Wall Mount

Needed a Wall Mounting Solution for my Ubiquiti Flex Mini 2.5G Switches since they don't come with any provisions for that. A 3D Scan of the Switch and some CAD solved the problem.

The Model comes Prealigned at an angle with Supports ( marked in blue ⬇ ) on the back to help it remain upright during Print. I recommend adding some Mouse Ear Brims to the tips of those to prevent them from peeling off the Bed. The same Supports will then have to be snipped off otherwise the Mount won't fit to the wall.

The Screw Holes have a 76mm Spacing and are designed to accept Counter Sunk Screws with a Head diameter of less than 7.5mm and a Thread diameter of less than 4.5mm - Go easy on the torquing down of them, the Print Orientation used to avoid the Overhangs of the formfitting Mount will otherwise cause it to split apart. 

The Mount was designed with the Switch sliding in from the top with the Ports facing down but other orientations may work too.