Spool winder for drill

easy print spool chuck for hand drill.

print the screw at 100% infill or the drill chuck will break the screw

there is a flat spot on the collar on the screw print that flat on the bed. use supports

print 2 of the spool holders 20% infill no supports

print 1 of the nuts 20% infill no supports

i used petg for this

screw on the first spool holder up against the collar on the screw

put on the spool and screw on the second spool holder

lock in place with the nut.

place in drill chuck and wind away.

uploaded version 2 of screw and locking nut for better functionality

uploaded a smaller spool to fit spools down to an ID of 50mm 

Print Settings

Printer Brand:

MK3

Printer: 

Prusa i3

Rafts:

No

Supports: 

Yes

Resolution:

.2

Infill: 

100% and 20%

Filament: any PetG any

Notes:

screw printed at 100% infill and supports
rest printed at 20% and no suppports

version 2 of screw and Nut , screw is longer and nut is higher tolerances and deeper.

Category: 3D Printer Accessories